Power Hammer Shoe

Hey guys, its been a while since i posted

so i thought i would share my newest

toy.

A power hammer shoe for the Massey,

the shoe itself puts a texture along flat bar i am

using for my gate commision.

 This is a picture of the finished object,

as you can see it is a large piece

of bar with the texture i want in it

welded into a frame.

This was working well until i tried it then it

bounced around a little too much so i

welded on some screws to keep it

on the hammer.

 The screws tighten up to make sure it doesnt move.

I used it a few times

until i started to get a bend into

the large centre peice.

The Massey pallets have a dip in them so

i had to correct that.

I used the fly press to straighten it out then

i welded a little 3mm plate on the bottom.

With this plate it seems to have stopped the

bending problem.

 

Leafing Hammer

Hey guys, i havent posted here

for a while and i really need to catch up

on this. Got a few things i want

to put up here over the weekend, a little guide

to making a ball stake i made and 

working on some repousse.

Till then this is the leafing hammer, 

i spoke about it breifly but we were asked to

shaft it and use it on the repousse

work.

This was the first of the hammers i have ever 

made up, i have made two since this one which

are alot better than this one.

Other than that i quite like it, its a bit

of History for my first hammer =]